Categories
 
 
 
 
 

Magnetic clutches

Claw clutches, type EZF

Claw clutches, type EZF

SKU:EZF4-20-M24
Availability
Usually ships in: 6 weeks
Your price: 215,00 € without TAX
258,00 € incl. tax
:
seller_img
You need help? Contact our specialists
Jozef Štreicher (EN) B
GSM: +421 901 901 707
Tel.: +421 32 2851 320
E-mail: magnety@selos.sk

Choose variant:
NameAvailabilityPriceBuy
Type: EZF 4, dH7: 20 mm, Power supply: 24 VDC, Execution: lubricated
EZF4-20-M24
6 weeks 258,00 €
Type: EZF 4, dH7: 25 mm, Power supply: 24 VDC, Execution: lubricated
EZF4-25-M24
On stock 258,00 €
Type: EZF 4, dH7: 28 mm, Power supply: 24 VDC, Execution: lubricated
EZF4-28-M24
6 weeks 258,00 €
Type: EZF 6.3, dH7: 25 mm, Power supply: 24 VDC, Execution: lubricated
EZF6.3-25-M24
6 weeks 264,00 €
Type: EZF 6.3, dH7: 28 mm, Power supply: 24 VDC, Execution: lubricated
EZF6.3-28-M24
6 weeks 264,00 €
Type: EZF 6.3, dH7: 30 mm, Power supply: 24 VDC, Execution: lubricated
EZF6.3-30-M24
6 weeks 264,00 €

Description

Clutches connect the driving and driven part by means of the parts equipped by the spur gearing that are given to the mesh by the effect of the electromagnet and are released by the switching off springs. The drive clutch part is created by the magnet body with the spur gearing. At the magnet body there are further located the forced off pins with the springs and adjusting screws.

The driven part shaft of the machine is by the clutch fast seated at the magnet body hole. The clutch driving part consists from the metallic plate with the spur gearing to which the flange from the non-magnetic material is actuated by the external gearing. At the flange there are gripped the permanent magnets for anchor at switched off condition gripping. The torque is transmitted by the spur gearing of the armature and magnet body from the driving to driven part.

The exciting coil is fastened on the carrier that is seated on the antifriction bearing on the magnet body. Two coil outlets are taken out by the insulated rope of length about 300 mm. The carrier of the coil does not rotate.

The clutch can be thrown in rest only, at synchronous revolutions, and/or also at small difference at the revolutions number, at sufficient flexibility of the drive and the small mass moment of the driven parts inertia. The disconnection can be executed at any allowed revolutions and transmitted torque. The claw clutches are suitable for the dry and also lubricated environment. At the dry run the ringless clutch is supplied with the cover against the dust penetration to the ball bearing.

The claw clutch shifted electrically has smaller dimensions in comparison with the multi-plate clutch of identical torque actuated electrically.


Documentation

Add new comment:

...

Add reply to comment:

 
 
 
 
 
 
 
 
 
 
 
Full (Desktop) version