Multi-plate electromagnetic brake ELB
Multi-plate electromagnetic brake ELB
Electromagnetically controlled multi-plate solenoid disc brakes (10 sizes).Read more360,00 € incl. 20% VAT
Product varieties
Product description
Electrically actuated multi-plate brakes transmit the nominal torque by the multi-plates friction that are gripped and released by the operating of electric magnet.
The brakes stop the rotary parts of the machine. Electrically actuated multi-plate brakes regarding to the size of transmitted torque has very small dimensions. They are characterised by the fast grow of the torque to nominal value and the small rest moment after the throwing out. Electrically shifted multi-plate brakes, therefore, fast react to the impulse and so they increase the accuracy and output of the machines - without any transmission elements. They decrease the dimensions and mass of the driving units.
The shell with the flange is fast connected with the drive machine part. Together with the external multi-plates it creates the driven part of the brake. The magnet body, in which gearing the internal multiplates engage, is fastened to the non-rotary machine part.
The internal multiplates are covered by the layer of the friction material according to the kind of the operation (lubricated or dry), that extends their service life and increases the friction. The external multi-plates drive by their steps the brake shell.
The anchor plate is connected with the magnet body by the driving pins. If it is into the exciting coil taken in the direct current, the anchor plate is attracted to the magnet body. If the brake is thrown out, the plate is forced off by the springloaded forced off pins on the flange of the distance bush.
The adjusting nut is screwed in on the anchor plate, so that at the brake throwing in it grips the multi-plates set. By the nut rotary the width of the air gap between the magnet body and anchor plate is possible to regulate. The width of the air gap influences the size of the transmitted torque. To its accurate adjustment the set of the feeler gauges attends that are fitted into to the nut recess.
The distance bush - it limits the extreme position of the anchor. The exciting coil is casted in the magnet body. To the exciting current supply the terminal board on the magnet body attends.
Add new comment:
Add reply to comment: