Sine table - single axis
Sine table - single axis
Single axis sine table for precision angle grinding and polishing.Read moreProduct varieties
Product description
The Fixar simple sine table is a highly precise tool, which is intended for reliable workpiece clamping during precise angle grinding, electrical discharge machining and for measuring purposes. It allows the setting of angles using a gauge in the range of 0 – 45° with high accuracy. You set angles using end gauges based on the sine principle. The unique design of the bearing along with the hardened base plate and side guidance provide extreme precision even after a long period of use. The sine table is equipped with a Neomicro permanent magnetic chuck, which is simple and low maintenance.
Parameters:
Application: Grinding, measuring, EDM
Technology: Permanent
Holding force: 100 N/cm2
Min. workpiece size: 4 x 4 x 1 mm
Poles: Transverse
Regrinding limit: 7 mm
Pole pitch: T1.9 1.4+0.5 mm (steel/brass)
Use:
- Accurate angle surface grinding
- Electrical discharge machining -EDM
- Measuring
Scope of supply:
- Sine table
- Allen keys
- Table for quick angle setting
- Instructions for use
Art. No. | Length | Width | Height | Axis spacing | Weight |
(mm) | (mm) | (mm) | (mm) | (kg) | |
SI1407 | 140 | 70 | 68 | 55 | 5,5 |
SI1515 | 150 | 150 | 79 | 135 | 12,0 |
SI1710 | 175 | 100 | 77 | 85 | 10,0 |
SI2510 | 250 | 100 | 77 | 85 | 16,0 |
SI2513 | 250 | 130 | 77 | 115 | 19,0 |
SI2515 | 250 | 150 | 79 | 135 | 20,5 |
SI3015 | 300 | 150 | 79 | 135 | 26,5 |
SI3020 | 300 | 200 | 79 | 185 | 35,0 |
SI3515 | 350 | 150 | 87 | 135 | 35,0 |
SI4020 | 400 | 200 | 87 | 185 | 52,0 |
SI4515 | 450 | 150 | 87 | 135 | 44,0 |
SI5025 | 500 | 250 | 94 | 235 | 84,0 |
SI6030 | 600 | 300 | 94 | 275 | 120,0 |
Add new comment:
Add reply to comment: